Traditional Only Clear Gasket Lacquer
Clear Gasket lacquer is for use with our Dipping tube and our gasket and ring system.
Gasket Lacquer dries in seconds. Two coats normally results in a satin finish, three coats a gloss, and four coats a high gloss.
Three coats can be applied on a dozen shafts in about 20 minutes. It is recommended to let the shafts cure for 24 hours before cresting. For the beginner or professional arrow builder. Low fumes and no mess. We recommend Duco cement, or Bohning Fletching Tape for gluing feathers on to this finish.